|
<1.0E06
static conductive esd flooring paint
ElectraGuard Main Page
ElectraGuard=ESD
Epoxy flooring
More Conductive than
esd vinyl tiles for a
faster more thorough charge decay*!
Meets all
minimum conductivity requirements for UL Safety
Warranted
for a LIFETIME of Conductivity!
New
Coating standard tile to increase conductivity (meets new EOS ESD
standards).
|
Click
to Expand
ElectraGuard Medium
Gray |
Click
to Expand
ElectraGuard Light
Gray |
|
Click
to Expand
ElectraGuard Tan |
Click
to Expand
ElectraGuard Beige |
SPECIFICATION OVERVIEW:
-
Standard colors, Medium Gray, Light Gray, Tan and Beige
-
Solids: 39% +/- 1%
-
Resistivity per EOS / ESD S7.1: ElectraGuard Medium and Light Gray
>1.4E04 <1.0E06 (RTG) @ >40% rH concrete substrate. ElectraGuard
Tan and Beige (RTG) <1.0E09 RTG @ >40% rH, concrete substrate
(<1.0E06 typical).
-
Static Charge Decay: <0.01 sec. per FTMS 101B, Method 4046
-
Charge
Generation: Zero per AATCC Step Test, Method 134-1979
-
pH: 6.0 - 7.0
-
Weight per Gallon: 9.5 - 9.6 pounds
-
Hardness 30 (Sward)
-
Viscosity: H - J (Gardner)
-
Solvents: Water - Glycol
-
Flash Point: 160 0
-
Dry Time: Touch; 7 hours,
-
Moderate traffic; 12hours, Full cure 7 days.
-
Coverage: 250 - 600 ft 2 per gallon
*Properly agitated and
grounded ElectraGuard applied to bare uncoated concrete.
|
Part Number: EG1X4
Availability: 4, 1gallon containers
(1 case)
Pricing: $445.50
Coverage 1st coat: 250 to 500 SF per
gallon
Coverage 2nd coat: 400 to 600 SF per
gallon
Average cost per SF (2 coats) $00.41
to $00.73 per S.F. |
Part Number: EG1X5
Availability: 1 ea 5 Gallon Container
Pricing: $550.25
Coverage 1st coat: 250 to 500 SF per
gallon
Coverage 2nd coat: 400 to 600 SF per
gallon
Average cost per SF (2 coats) $00.41
to $00.73 per S.F. |
|
