|
Electra Stat
ESD flooring Tiles: Specifications and Colors
Permanent Protection,
Powerful Performance, Outstanding Value
ElectraTile ESD flooring
tiles are designed
specifically for THE most demanding of manufacturing
environments; clean rooms, labs, hard drive manufacturing, DOD and
Munitions. Any application requiring exceptional
wear characteristics in concert with the highest surface
finish and most consistent electrical properties of ANY
ESD tile on the market!
SHINE,
VERSATILITY PERFORMANCE - SYNONYMOUS WITH
ELECTRASTAT
Electra Leads the
pack! Featuring permanently conductive micro encapsulated conductive
elements in concert with an extremely low maintenance high micro
finish top surface. Electra THE utmost in electrical
performance, aesthetics AND resiliency . With micro ground
edges Electra provide a near seamless appearance AND unlike
"typical" imports (and most US made) ESD Tiles that are loaded
with reconstituted, cheap limestone based recycled clay fillers
Electra has one of the highest static load limits in the industry!
THE
most resilient, flexible, strong AND long lasting ESD tiles
in the industry
PERIOD
Our unique conductive Permanent Bond fiber loaded
adhesive is furnished at no charge:
This easy to use
adhesive features the ultimate in electrically consistent
conductivity with excellent bond strength. Cleans easily with soap
and water. No more time consuming mixing (as is required with those
nasty epoxy based adhesives, no more problem causing variables and
no more staining problems either)! Nope no need for you to go thru
THAT.
For
Releasable installations without the Permanent Bond:
Our Liquid
conductive RELEASABLE adhesive makes replacement or removal
of the tiles a snap. This adhesive maintains permanent tack, is
conductive, water based, low voc and works GREAT for raised panel
access!
For a
releasable bond that leaves no residue on the substrate:
Our URAS fits the bill. Fiber reinforced for strength and
longevity. Our conductive carbon fiber matrix features
permanent properties yet allows the removal of the flooring while
saving the hassles of removing adhesive born residues. PERFECT
for leased facilities.
|
Ice Blue |
White Ice |
6091 |
|
605 |
604 |
6061 |
|
ITEM |
Standard test Method |
ASTM Spec |
Conductive Tile |
|
ELECTRICAL / ELECTROSTATIC PROPERTIES
|
Electrical Resistance
-Surface to Surface
-Surface to Ground |
ESD
S 7.1 (100V / 10V)
ASTM F-150 (100V / 10V)
NFPA 99 (500V)
DIN 51953 (500V) |
>2.5 X 104~<106Ω
|
2.5 X 104~106
|
|
>2.5 X 104
|
>2.5 X 104 ~ <8.3
X 105Ω
|
Electrostatic Propensity
(=Static Generation) |
AATCC 134
With heel grounders
|
-
|
<20 volts
|
|
Static Decay |
Federal Test
Method 101B Method 4046 at 15% Relative Humidity |
< 0.5 sec
|
<0.01 sec
|
|
OTHER
PROPERTIES |
| CEN
Classification |
DIN EN 685 |
|
Class 34 + 43
|
|
Composition of Material |
ASTM F 1700
Certificate of Compliance |
|
Homogeneous
|
|
Thickness |
ASTM F 386, DIN
EN 428 |
as specified ±0.005 in.
(.125)
|
.125
|
|
Nominal Sizes |
ASTM F 536, DIN
EN 427 |
±0.016 in./lin. Ft
(0.4mm/304.8 mm)
|
12" x 12", 24" x
24"
|
|
Squareness |
ASTM F 540 |
maximum 0.010 in. (0.25 mm)
|
<0.010"
|
|
Residual Indentation |
ASTM F1914
DIN EN 433 |
average less than 8%,
max. single reading 10%
|
< 7%
|
| Flexibility |
ASTM F 137 |
no crack or break
|
No crack or break
|
|
Dimensional Stability |
ASTM Fed. Std.
No. 501a
Method 6211, DIN EN 434 |
<0.020"/ft (0.51 mm/304.8 mm)
|
<0.015"/ft
|
|
Resistance to Chemicals |
ASTM F 925
DIN EN 423 |
No more than a slight change
in surface dulling, surface attack or
staining
|
no more than a slight change
in surface dulling, surface attack, or
staining
|
|
Resistance to Heat |
ASTM F 1514 |
∆<8 ave., max
|
<∆E=2.0
|
|
Resistance to Light |
ASTM F 1515 |
∆E<8 ave., max
|
<∆E=6.0
|
|
Static Load Limit |
Modified ASTM F
970-00 |
-
|
>2,500 psi
|
|
Smoke Density |
ASTM E 662 |
<450
|
<450
|
|
Flame Spread |
ASTM E 84, NFPA
225 |
<75
|
<75
|
| Fire
Resistance |
DIN 4102 |
|
B1
|
|
Critical Radiant Flux |
ASTM E 648, NFPA
253 |
|
>1.08 W/cm2(class
I Interior Floor Finish, NFPA Life Safety
code 101)
|
|
Abrasion Resistance |
ASTM D 1044,
CS-10-F Wheel,
500Gm Weight |
|
|
Cycle
10,000
|
% Gauge Loss
1.60
|
|
|
Resistance to Wear |
DIN EN 660-1 |
|
M
|
|
Effect of Castor Chair |
DIN En 425 |
|
No Damage
|
|
Color Fastness |
ISO 105 B02 |
|
At least 6
|
|
Standard for Health Care Faculties |
NFPA 99 |
|
Confirms to the requirements
of NFPA 99 in effect at the time of
installation
|
|
Fulfils product requirements |
DIN EN 649 |
|
yes
|
|
Underwriters Laboratories |
UL 779 |
|
Meets UL Standard
|
|
WARRANTY
|
| Free
from defects in Workmanship and materials* |
|
|
Five Years, Optional Lifetime
|
|
Conductivity* |
|
|
Lifetime
|
|
