Static Control Floor Mats for Hard Surface Flooring and Thin Pile (direct Glue down) Carpet and Concrete fully compliant the LATEST DOD, ANSI and NFPA standards. Results you can count on.
Chair casters often act as tiny ball mills grinding dirt, wire clippings even nuts and bolts deep into your hard surface flooring. Results: Unsightly scratches, gouges and premature wear that just can't be repaired. The manufacturers of ALL hard surface flooring require the use of either mats or expensive soft caster for just this reason (often voiding flooring warranties if not used). The problem is compounded in electronic assembly by the need for advanced electrostatic control. Not only must the mat protect the flooring, it must provide unparalleled electrical conductivity in order to dissipate the electrostatic potential generated by the contact and separation of the casters rolling on the matting.
Protect and improve the conductivity of anti static flooring, ESD Flooring Tiles, standard VCT, Epoxy, concrete and more. Excellent for use as a permanent or temporary esd safe workstation mat, easy to ground, easier to install.
Call for quantity discounts. Visit the bottom of this page for the webs best pricing on this quality ESD matting material.
|Many ordinary "anti-static chair mats" simply rely on the ambient humidity in the environment to render the mats slightly conductive. When the humidity is high (>60% rH) they sometimes meet the old specifications for conductivity (coming in slightly less than1.0E09) BUT when the humidity drops they become insulative! A mat's electrical conductivity to ground tells the tale. Does this mat really work? Not really. A piece of dry wood comes in about as conductive as this popular "anti-static" mat and it's not even close to being conductive enough to comply with the latest ANSI, DOD or NFPA ESD Standards|
Part# 40220 HS-B, Plus size and color
Our 40220 HS-B chair mats are for use on hard surface flooring such as concrete, vinyl, VCT, ElectraGuard floor paint and THIN Pile direct glue down carpeting. For chair mats recommended for use over THICK Padded Carpet please click here for our 40220 C.
|Surface Resistivity Point to Point (PTP per EOS ESD S 7.1)||>1.0E04 <1.0E06 (esd conductive)|
|Electrical Resistance to Ground (RTG per EOS ESD S 7.1)||>1.0E04 <1.0E06 (esd conductive)|
|Flooring Radiant Panel ASTM E648; NBSIR 75-950: NFPA 254, Critical Radiant Flux||0.73 W/cm2, Class 1|
|Smoke Density, ASTM E-662; NFPA 258; Average optical density in burning / smoldering mode||<450|
|Residual Indentation LF-475A||0.002 average|
|Abrasive Wear, Taber H-18 wheel, 5,000 cycles, 1,000 gm weight||1.1% loss of weight|
|Abrasive Wear, Taber H-18 wheel, 1,000 gm weight to wear layer penetration (end point)||>20,000 cycles, (2.0% loss of weight|
|Static coefficient of friction, ASTM D-2047-03, James Test average wet, dry leather||.60 approx.|
|Static load limit DIN 16961.2||>1,000 P.S.I.|
|Charge decay time per FTMS 4046-101c||much less than .17 seconds|
Stock Sizes (custom sizes readily available, please call for pricing).
Quantity discounts available
|Pale Gray, PN: Ti481||Dark Gray, PN: Ti482||Electronic Blue, PN: Ti483||Clean White, PN: Ti480|
|3' x 3'||$154.01|
|3' x 4'||$156.43|
|3' x 5'||$200.14|
|3' x 6'||$222.00|
|4' x 4'||$178.89|
|4' x 5'||$238.00|
|4' x 6'||$285.60|
|4' x 7'||$333.20|
|4' x 8'||$380.80|
PART NUMBER: 40220 HS-B followed by size and color.