Transform Standard Epoxy Floors into ESD Flooring

Save the Cost and Disruptions of Tearing Out the Old Floor!


The old flooring is in good condition – it’s well bonded, looks decent, but It’s NOT ESD Flooring! It’s EASY to generate relatively intense amounts of static on standard flooring. Some floors (like standard epoxy) will generate well over 5,000 volts when rolling a cart or walking across them. And, with today’s standards 100 volts is the most that can be generated to pass ANSI/ESD S20.20-2014! Plus, the tear out of that old flooring is an expensive, dusty and disruptive nightmare of down time and lost production! Or, maybe the existing flooring is VAT (vinyl asbestos tiles). Not only do these tiles create high static voltages the cost of asbestos abatement is Astronomical!

More Information

Project Description

The Problem

Old factory flooring is a perfect substrate for covering with Titanium Sheet Vinyl and Titanium sheet vinyl is PERFECT for use with our URAS peel and stick Adhesive! Titanium Sheet Vinyl in concert with URAS adhesive provides an outstanding solution for solving the headaches, cost and disruptions associated with removing thick set epoxy and other hard surface flooring. The install is odor and dust free and provides safe reliable anchoring of the new flooring to the old substrate.

  • Compliant to ANSI ESD S20.20-2014 & TR-53. Pass ESD Audits with Ease!
  • Combination resistance values (chairs, carts etc) interface flawlessly!
  • Saves the super High cost and Disruptions of tearing out the old floor.
  • Environmentally Responsible! Odor free and Dust Free installation!
  • 15 year track record, lifetime, PERMANENT static control properties.
  • Cover old VCT, VAT, Epoxy, most ANY Hard surface floor.
  • Cost Effective and SEAMLESS for the cleanest easiest to maintain floor in the industry!

What is Titanium?

Titanium is a 2 mm thick resilient Vinyl flooring featuring a FULL SURFACE static conductive backing with a diamond hard top surface. Titanium has a 15 year track record of clients reporting zero issues with wear or degradation of its superb static control properties. It is available in four designer colors and is typically in stock. Titanium handles chair casters, carts, forklifts and other types of traffic flawlessly. Plus – unlike mere tiles, it’s seamless. With no place for dirt to hide a simple dust mopping makes the flooring look like it’s just been damp mopped.

Installation in a Nutshell

Remove wax and residues from the existing flooring. Cover with URAS leaving the liner in place. Double cut the adhesive and remove the dross from beneath. Overlay the adhesive liner with Titanium Sheet Vinyl and double cut for seams. Roll back the flooring. Remove the adhesive liner. Install ground. Roll the flooring on top of the adhesive and roll over it with a 100 pound vinyl roller. Groove and heat weld the seams.


When Titanium and URAS are used in concert the results are phenomenal static control properties, a dust and odor free installation, dependable wear performance that can handle ANY type of traffic and unparalleled ease of maintenance. The cost is much less than other options such as interlocking tiles or removing the old flooring AND better for the environment (land fills have enough old flooring – why feed them more).