Description
This ESD brush features medium firm 1″ long bristles, it’s heat resistant and is made with nylon fibers that won’t slough carbon and get your parts dirty. It has a static conductive handle permanently bonded to 100% 6.12 nylon static dissipative bristles for a fast yet controlled discharge of static electricity thru the grounded technicians hand.
SAVE!
$1.00 ea 10-24
$2.00 ea 25 Plus!
WT-09 ElectraBrush® 6.75″ x 2.5″ Static Control Brush with static conductive nylon handle. This ESD brush is used to remove particulate and static laden dust and debris. It is clearly marked with the international ESD safe warning logo and features a static conductive nylon handle that equalizes the static potential between the brush fiber, handle and technician for subsequent discharge of accumulated charges through the primary ground system for the technician. It is heat resistant to 175 degrees and resistant to most common chemicals used in the electronic assembly environment. This brush is easily compliant to the latest ESD association recommendations for use in static control environments with a volume resistance of >1.0E04 and <1.0E11 when tested to ANSI/ESD STM11.12-2007. Perfect for electronic manufacturing, especially circuit boards with hard to remove residues.
WT-09 ElectraBrush® 6.75″ x 2.5″ Static Control Brush – Features
- Static conductive handle.
- Static dissipative bristles.
- Chemical resistant nylon bristles and handle.
- Non sparking and heat resistant.
- Carbon free bristles with NO carbon sloughing.
- Heat resistant to 175 Degrees F.
- Fast and efficient charge decay.
- Marked with International ESD symbol.
WT-09 ElectraBrush® 6.75″ x 2.5″ Static Control Brush – Specifications
| Detail | Value |
|---|---|
| Bristle Type | Medium firm 0.012″ thick dissipative nylon |
| Fibers per ANSI/ESD STM11.12-2007 | > 1.0E04, <1.0E11 |
| Handle per ANSI/ESD STM11.12-2007 | > 1.0E04, <1.0E06 |
| Bristle Trim Length | Approximately 1 inch |
| Bristle Head Width | Approximately 2.25 inches |
| Bristle Head Height (total thickness of bristles) | Approximately 1/8 inch |
| Total Length | 6.75 inches |
| Handle Width | Approximately 1/4 inch (semi flat) |
| Heat Resistance | 80 degrees C. / 176 deg F. |
| Supplied in units of 1, 10 and 25 | Part Number: WT-09 |
UNITED ESD PROVIDES FREE SHIPPING ON SELECT ITEMS MARKED WITH “FREE SHIPPING”
MATTING
This offer is specifically limited to the Continental USA (lower 48 states) and Canada for most mats. Free shipping is further limited to us shipping standard freight and using a carrier of our choice. Free shipping to Canada DOES NOT include duties, taxes or brokerage fees (these are the responsibility of the purchaser). Free shipping is not available for Titanium Chair Mats, Assembly Area Mat Kits (with certification) or Ultimat 1 (by Static Solutions).
NOTE
Our Free shipping program for matting is for door to door service to the first level of the building at the delivery address only.
NOTE FOR LARGE AND HEAVY MATTING ORDERS
If the client does not have a loading dock (or if the delivery will need transported to the upper levels of a building) please contact us immediately as an additional lift gate and inside delivery charge will be required. These charges are NOT covered in our free shipping program. This charge will be calculated and must be approved by you (the client) prior to United shipping your order.
IONIZERS
United SCP provides free shipping on all ESD Ionizers marked as “free shipping.” This offer is specifically limited to the lower 48 States. This offer is limited to us shipping standard freight and using a carrier of our choice. Should you wish to expedite your free shipping items please contact our sales team for a shipping quote by calling 719 676 3928 (option 1) or by email. Full Details Thanks!
Reviews
There are no reviews yet.