Ground and Fasteners – Fully Compliant to ANSI ESD and MIL standards

Original price was: $8.90.Current price is: $5.20.

Give your ESD Matting a reliable Earth to Gound connection safe away from static electricity with USCP Ground and Fasteners.


UltraStrong Common Point Bench Mat Ground Cords are supplied as an easy to install kit requiring only a screw driver for fast easy installation to ANY anti static bench top material.
This product is for use where ESD wrist straps will be used in conjunction with an ESD mat.


UltraStrong Common Point Bench Mat Ground and Fasteners have a small block that snaps onto an antistatic mat (fasteners included with your order). This grounding block contains 2 each female banana receptacles that are used as a common point input for wrist straps. Simply snap the block onto mat, plug in wrist strap(s) and ground the opposite end of the cord’s #10 ring terminal to either the center screw of an AC electrical face plate cover or as is recommended by your ESD program Coordinator. Economical, efficient, secure, easy to use and fully compliant to latest ANSI ESD and MIL standards!


In order to operate effectively all anti static table top mats must be attached to a reliable earth ground connection. UltraStrong common point ground cords are an integral component – allowing easy placement (anywhere on the mat) and providing a female 3/8 socket for subsequent attachment to the anti static mat. To comply with industry accepted standards the wrist strap must be attached to the same ground point as the ESD mat, hence the attached ground block contains 2 ea inputs for standard wrist straps.


UltraStrong Common Point Bench Mat Ground and Fasteners include our universal mat snap kit. To achieve reliable grounding of you anti static mat the kit must be attached securely to your mat (it must not be loose). Simply puncture a hole in the matting material with a screw driver, awl or punch making sure not to oversize the hole (over sizing this hole may not let the fastener contact the conductive inner scrim of some of the advanced 3 layer conductive mat materials). Place the base through the underside of the mat, select the appropriate snap (male), place above base, select the appropriate length screw, place through snap, into base and tighten securely. Use the washer to find tune compression. With UltraStrong, attach the ground cord to your snap, plug in wrist straps and attach the ground cord to a reliable common point ground in your building. Each mat requires attachment to electrical ground. Mats should not be daisy chained.


UltraStrong Common Point Bench Mat Ground and Fasteners – Features
  • Grounds tabletop anti-static mats AND wrist straps!
  • Compliant method of grounding mats and straps!
  • Provides 2 grounding plugs for wrist straps with banana plugs.
  • 10 mm (3/8”) female snap connection for mat.
  • 15’ grounding cord with ring terminal for ground.
  • Mat connection snaps included (our universal mat snap kit).
  • Connect to dedicated ground or properly grounded electrical outlet (center screw of face plate cover works well).



Facebook Page
All Products


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.