Description
Perfect for all antistatic ESD chair mats and table top matting materials! Works great with a multitude of the most common ground cords (supplied separately).
Sold in convenient quantities of 10 kits per unit.
An easy to install universal snap kit designed to fit nearly every thickness of ESD bench top matting and floor runner material and simply requires a screwdriver for fast secure attachment of the fastener to the mat. Designed to provide a convenient grounding lug for subsequent attachment of any of our ground cords and all standard 3/8 (10mm ground cords). Available in bag o’ ten units. Economical, efficient, secure, easy to use and fully compliant to the latest ANSI ESD and Mil Standards.
In order to operate effectively all anti static, ESD floor, and table top matting must be attached to a reliable earth ground connection. UltraStrong universal mat to ground cord fasteners are an integral component allowing easy placement anywhere on the mat. The Universal Snap Kit also provides a female socket or male stud for the subsequent attachment of most standard grounding cables. To achieve reliable grounding of anti static mats the kits must be attached securely to the mat.
The USCP Universal Snap Kit makes it easy.
Instructions
- puncture a hole in the matting material with a screw driver, awl or punch making sure not to oversize the hole (oversizing this hole may not let the fastener contact the conductive inner scrim of some of the advanced 3 layer conductive mat materials).
- Place the base through the underside of the mat, select the appropriate snap (male or female), place above base, select the appropriate length screw, place through snap and into base and tighten securely.
- Use the washer to find tune compression. Attach the appropriate ground cord (supplied separately) to the snap and attach the ground cord to a reliable common point ground in the building. Each mat requires attachment to a common ground point. Mats should not be daisy chained.
Includes:
- 10 each – 10mm (3/8″) Female Snap
- 10 each – 10mm (3/8″) Male Snap
- 20 each – Screws (1-short,1-long)
- 10 each – Washer
- 10 each – Screw Anchor Base
- Only requires a Philips head screwdriver for installation!
Reviews
There are no reviews yet.