Description
Professional Grade at a Realistic Price!
Professional Grade! Fully compliant to the new ANSI/ESD S 20.20-2014 ANSI/ESD Static Control Garment Standards. Light in weight yet INDESTRUCTIBLE in performance. Unisex Design, great fit. These garments may be machine washed with great results and are readily available in White and Blue. We Challenge You to Find a Better ESD Lab Coat at TWICE the Price!
ElectraWear ESD Lab Coats are made of an indestructible yet lightweight synthetic fabric with a 5 mm grid work of static control monofilaments. The major seams are triple stitched and each lab coat comes with a breast pocket, side pockets, easy to adjust snap style cuffs. ElectraWear Lab Coats are a breeze to launder and are a true wash and wear fabric! These garments are highly resistant to stains and may be washed (gentle cycle) in industrial washing machines OR at home (always wash separately and use a mild detergent such as woolite or a very small amount of tide 2x.
Drying
Hang dry ElectraWear ESD Lab Coat for best results or dry using a VERY low heat setting for about 10 minutes prior to hanging.
ElectraWear lab coats significantly shield and reduce static by providing an electrical conductivity that is considered SAFE and approved for use around Energized Equipment.
Features
- Perfect for Electronic Manufacturing, Server Areas and more.
- Safe and Consistent Static Control
- COMPLIANT TO: ANSI/ESD S20.20-2014, Static Control Garment and FAA, Motorola and ATIS Standards
- 2 year life expectancy
- Warranted for 1 year or 100 washings (details apply, see the bottom of this page).
- Low to NO Odor
- Snap style Cuffs and front closure, Side hip pockets & breast pocket.
- Environmentally friendly and LOW VOC content
- Easy wash and wear care.
- Made in the USA!
- Outstanding Value and Professional Grade.
Specifications
| Spec | Value |
|---|---|
| Electrical Resistance: | >1.0E06 to <1.0E09 (static dissipative) |
| Sleeve to Sleeve Resistance: | <1.0E09 1 (static dissipative) |
| Glass Transition Temperature: | 250 degree F. |
| Composition: | 96% Poly, 4% nylon carbon monofilaments |
| Tear Strength: | warp: 3.0 kg / weft: 1.9 kg (JIS L1096-6.15.5-D) |
| Flash Point: | 1040 Degrees F. |
| Yarn Type, warp and weft: | Poly 75D/36F; Conductive 70D/25F polyamide base |
| Weave: | 2/1 twill with 5 mm grid |
| Air Permeability: | 6.0 CC/CM2/Sec (JIS-L1096-A) |
| ANSI/ESD S2020-2014 | Compliant to Static Control Garment |
Size Chart
| Size | Length | Chest | Sleeve |
|---|---|---|---|
| XS | 36.75″ | 45.5″ | 22.5″ |
| S | 35.5″ | 47.5 “ | 22.75″ |
| M | 36.5″ | 49″ | 23.25″ |
| L | 37″ | 50.5″ | 23.75″ |
| XL | 38.5″ | 51″ | 24.25″ |
| XXL | 39″ | 52″ | 24.5″ |
| XXXL | 40″ | 55″ | 25″ |
| 4XL | 40.75″ | 57.5″ | 25″ |
| 5XL | 41.5″ | 59.5″ | 25.5″ |
| 6XL | 42″ | 60″ | 25.75″ |
Cleaning Instructions
Machine Wash these ElectraWear ESD Lab Coat on gentle cycle, cool to warm water (at temps of under 104 deg F). Use proper amount of a liquid mild non-ionic/anionic detergent (like Tide 2x or similar) that contains no fabric softeners. Do not bleach. Wash smocks separately, do not mix with other industrial laundry. For best results simply hang dry (they dry very quickly). To machine dry: Do NOT use fabric softening sheets. Dry on low setting (do not dry at temperatures over 110 deg F), do not tunnel dry. These smocks dry very quickly, do not over dry or wrinkling may occur. Hand washing: These smocks may be hand washed with the same basic instructions as above.
Warranty
The conductivity and mechanical performance of the ElectraWear ESD Lab Coat is Warranted for one year or 100 washings if the instructions for cleaning as listed in the above table are followed rigorously. This warranty is void if the garment has been permanently altered, burned or defaced.
Reviews
There are no reviews yet.