Description
Free Shipping in the Continental USA Only* New! Common point ground cord included at NO CHARGE with Custom Cut ESD Table Top Mats made from this Material!
As low as $319.62 DELIVERED
Anti Static Mat Reduces Mechanical Shock. Slow, thorough charge decay for a controlled static discharge.
PART NUMBER:
169-AS
UltraCushion table top matting features a wear resistant antistatic top layer bonded to a static dissipative foam bottom layer. The top wear layer is designed for durability and ease of cleaning while the thick cushiony bottom layer provides excellent mechanical shock protection.
UltraCushion forms well to bench tops and provides outstanding longevity even in the harshest of environments. UltraCushion’s electrical resistivity falls in the high static dissipative range.
While we don’t recommend this material for use with our constant monitors or for use in sophisticated Electrostatic Protected Areas it can be a perfect choice for an economical low static generation material in packaging areas or when working with high voltage power supplies.
Should a higher conductivity material be required for critical esd audit scenarios consider a 3 layer esd mat like our 167 or 168AS. UltraCushion features low static charge generation and meets older JEDEC EIA-625 table 2 of >1.0E05 and < 1.0E10 RTG.
Physical Properties:
- Thickness: .250 (1/4 of an inch)
- Colors: Sky Blue
- Available: 18, 24, 30 & 50 inch widths.
* Pre-cut Pads, Custom Cuts and up to 40′ lengths.
Electrical Properties
- PTP PER ESD 4.1, 2006 >1.0E06 <1.0E010
- RTG PER ESD 4.1, 2006: >1.0E06 <1.0E010
- TYPICAL PTP @ 40%rH, 100VDC, 71 Deg F: 4.30E09
- TYPICAL RTG @ 40%rH, 100VDC, 71 Deg F.: 6.86E09
Features
- Economical and Easy to keep clean
- Available up to 52 inches wide!
- LOW static generation, controlled static decay
- 1/4 inch thick, cushions delicate products
- Perfect for non critical esd control areas
A Full 1/4″ Thick! Cushions sensitive products! Anti Static AND Mechanical Shock Protection in One. High static dissipative range of <1.0E10 and >1.0E07 for a slow and controlled electrostatic decay rate of 1,000 to 100 volts in 3.4 seconds.
Clean surface featuring NO carbon sloughing. Perfect for non critical ESD control table tops, static control for printers, packaging areas and more. Excellent anti static protection when working with high voltage power supplies (reduces electrical shock hazards) Perfect for a multitude of uses!
Reviews
There are no reviews yet.